User manual

Spectrum Z510 User Manual
www.zcorp-users.com
2
USE OF EQUIPMENT
Z Corporation's Equipment, and use of the Equipment, may be subject to limitations imposed
under patents licensed to or owned by Z Corp., and is to be used solely for the fabrication of
appearance models and prototypes using new Z Corporation-supplied consumables from Z
Corporation or its authorized distributors in the original packaging. Other uses may be
restricted; contact Z Corporation for further information. Consult the user's manual before
operation of any Z Corporation Equipment.
The Equipment may be covered by the following U.S. Patents:
5,204,055 5,340,656 5,387,380 6,007,318 6,375,874 5,902,441
6,416,850 6,610,429 6,403,002
The Equipment is designed to be used by design engineers and other professionals in the
production of early-stage 3D appearance models and prototypes. The Equipment is not to be
used to produce, either directly or indirectly, medical or other products that may require precise
dimensions or tolerances to ensure the safe and effective operation of such products. You
agree to indemnify, defend and hold Z Corporation and its officers, directors and employees
harmless from and against any and all claims, losses, damages, costs and expenses resulting
from any use of the Equipment other than for the production of early-stage appearance models
and prototypes.
If the customer has purchased all relevant casting-specific products as recommended by Z
Corp. (casting-specific service contract, hardware, software, and consumables), as well as a
casting license, then the customer may also utilize the Equipment to fabricate molds for casting
using new Z Corporation-supplied consumables from Z Corporation or its authorized distributors
in the original packaging.