User manual

Spectrum Z510 User Manual

www.zcorp-users.com

3 Routine Operation

3.1 Preparing the Build Area

1. Preheat printer if needed. Preheating

the printer will reduce the print time if

the printer has not reached the

required temperature. To preheat the

printer, select the Preheat Printer

option under the Service menu.

2. Lower feed piston by

pressing down on the

‘Feed Down’ button

until the feed piston

automatically drops.

3. Take printer offline by

pressing ‘Offline’ on

the control panel.

4. Lift top cover.

WARNING: Use only powder supplied by Z Corporation. Use of any other material

may impact the performance and/or safety of your Spectrum System and will void

warranty of equipment.

5. Raise build piston by

pressing ‘Build Up’.

Once build piston has

stopped, press ‘Build

Up’ once. You will see

‘Hold for Unload’ on the

control panel.