Hardware manual

Spectrum Z™510 3D Printer Hardware Manual
www.3dpuser.com
ii
New Vacuum Attachment Image, 14
O
Offline Mode, 20
Online Mode, 43
Open Or Hollow Area Of Part, 29
Open Or Import Files, 28
Orient Parts, 28
Other Service Menu Items, 59
Overflow Bin Cover, 3
Overview, 1
P
Paraplast Application Notes, 38
Paraplast Curing Information, 38
Paraplast Safety Precautions, 38
Part Accuracy, 6
Part Infiltration, 37
Part Orientation, 29
Part Orientation, 28
Part Placement, 5
Part Strength, 5
Parts Are Weak Or Crumbly, 62
Parts Containing Overhangs, 29
Piston Screws Lubrication, 51
Place Printer Online, 16
Polypropylene Scraper, 32
Post-processing Tools, 32
Powder Recycling System Components, 10
Powder Recycling System Image, 7
Preheat Printer, 20
Preheat Printer Command, 47
Preparing The 3d Printer, 15
Preparing The Build Area, 20
Preparing The Build In Zprint Software, 17
Prime Wash Line, 57
Print Assembly, 4
Print Dialog, 30
Print Head Report, 59
Print Head Report Dialog, 43
Printer Assembly With Carriage Insert, 9
Printer Components, 7
Printer Control Panel, 8
Printer Periodic Self Maintenance, 16
Printer Storage Preparation, 59
Printing The Build, 30
Purge Print Head Command, 43
Q
Quick Start Guide, 15
R
Removing The Finished Part, 34
Removing The Part, 18
Replace Fluid Lines With Distilled Water, 59
Report Capabilities, 58
Restoring Network And Firmware Settings, Iv
Rinse Rubber Parking Cap, 23
Rinse Rubber Wiper Blade, 23
Roller, 4
Routine Operations, 20
S
Saturation Troubleshooting, 62
Serial Port Connection, 69
Service Menu, 43
Service Print Heads, 57
Service Station, 9
Slice View, 30
Slow Axis Lubrication, 50
Soft Acid Brush, 33
Soft Horsehair Brush, 33
Stiff Detailing Brush, 33
Stiff Handle Brush, 33
Stripe Test, 57
System Components, 7
System Specifications, 68
T
Tamp Powder, 21
Thin Planar Parts Are Warping, 61
Tips On Gross And Fine Depowdering, 32
Tips On Setting Up The Build, 27
U
Unpark Command, 43
Use Of Equipment, 1
Using Paraplast X-TRA Wax, 38
Using Z-Bond Cyanoacrylate, 38
Using Z-Max Epoxy, 39
V
Vacuum Attachment, 3
Vacuuming Operation Warning, 35
View Binder Levels, 25
View Printer Log, 59
Void Warranty, 20
W
Waste Fluid Disposal, 25