Hardware manual

Spectrum Z™510 3D Printer Hardware Manual Service Menu and Other Maintenance

www.3dpuser.com

8 Service Menu and Other Maintenance

The ZPrint Service menu is the primary interface from the desktop when performing routine maintenance

on the Spectrum Z™510 3D Printer.

8.1 Unpark

Unpark moves the Carriage from its parked position at the Service Station to the opposite side of the Fast

Axis to allow easy access for routine cleaning.

8.2 Change Print Heads

1. Determine which print head needs to be changed. This is done either by an error message during

printing, or by accessing the Print Head Report command located on the ZPrint Service menu.

2. Place the printer Online.

3. Select Service > Change Print Heads > Start. When you click Start in the Change Print Heads dia-

log, the printer moves the Carriage over to the opposite side of the Fast Axis for easy access.