Hardware manual

Spectrum Z™510 3D Printer Hardware Manual Quick Start Guide

www.3dpuser.com

3. Open the File menu and select 3D Print Setup. In the 3D Print Setup dialog, select your Printer,

Powder Type, and Layer Thickness options.

4. Select 3D Print on the File Menu or click the 3D icon on the Toolbar. Choose your settings in the

Printing Options dialog and click OK. Proceed through the series of preparation dialogs that appear

before the build starts.

4.3 Removing the Part

1. Wait for part to complete printing. Check the software for part orientation.

2. Gross depowder the part and remove from build area.