Hardware manual

Spectrum Z™510 3D Printer Hardware Manual Introduction

www.3dpuser.com

The Z510 Accessories Kit and Tool Kit contain parts for user maintenance and items frequently used while

post-processing printed parts.

Accessories Kit

Includes: 12 Disposable Pour Spouts 38-400 Thread; 1 32 oz. Scoop; 1 10’ Ethernet Cable (blue); 1

CAT5e RJ45 Crossover Cable (red); and 1 Box of Nitrile Gloves - 100 Count, Large. Not Pictured: Powder

Tamp, ZPrint Software CD, and trays.

zp®140 High Performance Plus Powder zp140 is a multi-purpose material system that

offers significantly easier post-processing

and exceptional color performance. The "Plus" in

our High Performance powder is the

new Water Cure process.

• Water Cure – The easiest and safest post-

processing available. Only tap water is

required to seal and strengthen your printed

parts, and it has the lowest cost per in³.

• Vivid Colors - zp140 delivers the most vivid

colors when infiltrated with Z-Bond.

• Brightest Whites – 180% whiter than zp130.

Read the zp®140 MSDS

Read the zp140 User Guide

z®Cast 501 Direct Casting Powder Our zCast 501 Direct Casting Material can be

used to create sand casting molds for non-fer-

rous metals. This material is a blend of foundry

sand, plaster and other additives that have been

combined to provide strong molds with good sur-

face finish. It is designed to withstand the heat

required to cast non-ferrous metals.

Read the z®Cast MSDS

zp®15e Specialty Powder The zp15e Elastomeric Material has been opti-

mized for infiltration with an elastomer to create

parts with rubber-like properties.

Read the zp®15e MSDS