User's Manual

Chapter 5 Utility Overview Page 65
Link Test:
Link Test is provided to test the connection quality between Wireless USB Adaptor and access
point / router you connected to. You may follow the steps below to test the connection quality.
Figure 83 Wireless Configuration Utility－Link Test
1. Enter the IP address of the access point you connected to.
2. Choose the numbers and size of the packet.
3. Select the
Continuous Link test to test the connection quality until you stop it; or leave
the
Continuous Link test blank to test it only once.
4. Click Start to find out the result.
If Packets Received Ok equals to Packet Transmitted OK, the connection quality is great;
however, if not, please go to
Site Survey to choose other available access point / router in
order to get better connection quality.