User's Manual Part 2

-25-
Profile
The Profile field allows you to set values for all parameters by selecting a previously defined profile.
To create the profile, go to the Profile field, type a profile name and set the corresponding parameters.
If one of the profiles is no longer used, you may remove it by clicking the Delete button. After
changing parameters, save the profile and click the Apply button to take effect. You can have
multiple profiles and modify the profile at any time.
Alternatively, you may choose the profile by right clicking the system tray icon on the task bar, making
the configuration more friendly and efficient.
Network Type
There are 3 network types for the 11Mbps Wireless LAN PC Card to operate. If you need to
access company network or Internet via Access Point, select “Infrastructure”. To set up a group
of wireless stations for file and printer sharing, select “Pseudo AdHoc” or “802.11 AdHoc” (without
Access Point). If Pseudo Ad-Hoc (without access point) is selected, you need to set wireless
stations with the same channel. For 802.11 AdHoc, the same ESS ID is required to the
wireless stations.
You may right click
the WLAN system
tray icon to choose
the pre-set profiles