User's Manual Part 2

-32-
Link Test:
The Link Test tool helps you examine data transmission quality between your 11Mbps Wireless LAN
PC Card and any workstation on the network. By entering IP address of 2 remote station, setting
ping interval and packet size, you may know whether communication has been made successfully or not.
Additionally, you may run the loopback test by clicking the Look back button to verify the
communication quality between your wireless station and Access Point. The Refresh button is used
for setting the counters back to 0.
AP Browser:
By clicking the Rescan button, the AP Browser can display Access Points around the working
environment. Besides showing the ESSID of each Access Point, it also displays BSSID, Channel,
Signal, Quality and Supported Rates. To join any of the displayed Access Points, highlight the
Access Point you desire to connect and then click the Join BSS (when there are more than 2 Access
Points with the same ESSID), or Join ESS button to join the group.