User's Manual

20
wireless network. Specifies rate of data transmission. Select the desired rate from the drop-down
menu and choose “Best” to adapt the rate to the best available.
Preamble Type: The Preamble defines the length of the PLCP synchronization field for
communication between the Access Point and Network Card. Select the appropriate preamble
type and press the Apply button to set it. The default setting is ‘Dynamic’.
Super-G Mode: Enable Super-G may enhance the wireless throughput. The default setting is
Disable.
RTS/CTS Threshold: RTS Threshold is a mechanism implemented to prevent the “Hidden
Node” problem. If the size of the packet transmitted is larger than the value you set, the RTS will
be enabled. When the RTS is activated, the station and its Access Point will use a (RTS/CTS)
mechanism for data transmission. The setting range is 0-2346.
Fragmentation: Fragmentation mechanism is used for improving the efficiency when there is
high traffic within the wireless network. If you transmit large files in a wireless network, you can
enable the Fragmentation Threshold and specify the packet size. This specifies the maximum size
a data packet will be before splitting and creating a new packet. The setting range is 256-2346.
For example: If you set value as 256, it means the packet will be fragmented into “256” bytes
while transmitting.
Note: If you complete the settings, please click on “Apply” for changes to take effect.