User manual

Chapter 5 Management Page 58
Backup Settings
By clicking “Backup” a dialog box will popup. Save it, then the configuration file is saved to your
local computer.
Retrieve Settings
By clicking “Browse” a file selection menu will appear, select the file you want to load, like bridge.cfg;
Click “Retrieve” to load the file. After automatically rebooting, new settings are applied.
Restore Factory Default Settings
The R2 Extender provides two ways to restore the factory default settings:
Restore factory default settings via Web
From “Backup/Restore Settings”, clicking “Restore” will eliminate all current settings and reboot
your device, then default settings are applied.
Figure 47 Restore Settings
Restore factory default settings via RS-232
If software in R2 Extender is unexpectedly crashed and no longer reset the unit via WEB, you may do
hardware reset via RS-232. For detailed instructions please refer to Chapter 2 RS-232 section.