User manual

Chapter 5 Management Page 57
Click “Browse” to select the firmware file.
Click “Upload” to load the file into the R2 Extender.
Wait a moment, the system will reboot after successfully upgrade.
Do NOT cut the power off during upgrade, otherwise the system may crash!
Backup/Restore Settings
It is strongly recommended to back up configuration information in case of something unexpected. If
tragedy hits your device, you may have an access to restore the important files by the backup. All these
can be done by the local or remote computer.
Open “Backup/Restore Settings” in “Management” as below:
Figure 46 Backup/Restore Settings
Note: