User manual

Chapter 3 Basic Settings Page 28
Wireless Client Isolation Disable
Access Control Disable
SSH (Secure Shell) Enable
SNMP
Enable/Disable Enable
Read Community Name Public
Write Community Name Private
IP Address 0.0.0.0
System Requirements
Before configuration, please make sure your system meets the following requirements:
A computer coupled with 10/ 100 Base-TX adapter;
Configure the computer with a static IP address of 192.168.1.x, as the default IP address of R2
Extender is 192.168.1.1, X can not be 0, 1, nor 255;
A Web browser on PC for configuration such as Microsoft Internet Explorer 6.0 or above,
Netscape or Firefox.