Specifications

90
SERVSWITCH™ DUO AND SERVSWITCH™ QUADRO
Appendix B:
Rackmounting the Duo/Quadro
If you want to mount the ServSwitch Duo/Quadro, use the included rackmount
brackets and screws. (If you’ve lost these, call Black Box Technical Support.) If
you’d like to rackmount a Duo Extender, the Extender’s manual will tell you how
to do it.
The 4- and 8-Port Duos mount in 1U of vertical rack space and have two
mounting holes on each side. Their mounting brackets each have two matching
holes, and they come with four screws.
The 12- and 16-Port Duos and the Quadro mount in 2U of vertical rack space
and have three mounting holes on each side. Their mounting brackets have three
matching holes, and they come with six screws.
Screw the included screws through the holes in the brackets and into the sides of
the Duo/Quadro, as shown in Figure B-1 or B-2 on the next page. Then attach the
bracketed Duo/Quadro to your rack with your own screws, bolts, cage nuts, etc.