Specifications

68
SERVSWITCH™ DUO AND SERVSWITCH™ QUADRO
• To select “video only” access, press [Ctrl] + [Enter] or [Ctrl] + [Return] (you
can use either left- or right-[Ctrl]). When you select a CPU for video-only
access, its video output will be displayed on your monitor but you will not be
granted keyboard and mouse control at any point. “Video Only” will be
displayed on the reminder banner (see Section 5.12) if the banner is enabled
(see Section 5.13.2).
If mouse switching is enabled (see Section 4.7.7), you can also use a 3-button or
wheel mouse to select CPUs for any of these three types of access. As shown in
Figure 5-8, to select a CPU for shared use when the menu’s highlight bar is on it,
click on the left-hand mouse button (colored gray in the illustration). To select a
highlighted CPU for exclusive use, press and hold either [Shift] key on your
keyboard, click on the left-hand mouse button, and release [Shift]. To select a
highlighted CPU for video-only access, press and hold either [Ctrl] key on your
keyboard, click on the left-hand mouse button, and release [Ctrl].
Figure 5-8. Using the left mouse button to select CPUs from the menu.
Select CPUs from menu:
3-button mouse
Wheel mouse