Specifications

45
CHAPTER 4: Configuration
understand, because all of the menus will be in that language and you might find it
difficult to reselect your desired language.
4.7.3 H OTKEYS
Accessed through: SETUP OPTIONS
Possible settings:
CTRL+ALT (factory default)
CTRL+SHIFT
ALT+SHIFT
ALT GR ([Alt Graph], the right [Alt] key)
LEFT ALT+RIGHT ALT
LEFT CTRL+LEFT ALT
RIGHT CTRL+RIGHT ALT
DISABLED
The keyboard “hotkeys” are special combinations of keys that, when used together
with certain keyboard “command keys,” perform special Duo/Quadro functions.
For example, pressing the hotkeys together with the “M” key will cause the on-
screen menu to be displayed on your monitor. Other hotkey combinations allow
you to query which computer you are connected to, to move the on-screen menu
around the screen, and more. You can also use the hotkeys together with the port
number to quickly select a chosen computer without activating the on-screen
menu. See Section 5.8 for full details on using keyboard hotkeys to control the
Duo/Quadro.
You can select “DISABLED” to disable the hotkeys and all associated keyboard
commands. We don’t normally recommend that you do this, but if you have to,
bear in mind that users will only be able to access the on-screen menu by using the
Duo’s/Quadro’s front-panel controls.
4.7.4 K EYPAD C ONTROLS
Accessed through: SETUP OPTIONS
Possible settings: ENABLED (factory default), DISABLED
If you want to, you can disable the keypad controls (pushbuttons) on the front of
the Duo/Quadro so that they can only be used to select the special channels “o”
and “0” (the on-screen menu and the nonexistent channel zero).