Specifications

44
SERVSWITCH™ DUO AND SERVSWITCH™ QUADRO
4.7 Setting the SETUP OPTIONS and GLOBAL PREFERENCES
The SETUP OPTIONS and GLOBAL PREFERENCES are operating parameters
that apply to the whole ServSwitch Duo/Quadro system rather than to individual
users. These may only be set or changed by the system administrator logged in
using the ADMIN account. Once you’re logged in as ADMIN, take these steps:
1. From the main menu, press [F1] for MORE MENUS.
2. Use the arrow keys (the ones on the main part of the keyboard, not the
numeric keypad) to position the highlight bar over SETUP OPTIONS or
GLOBAL PREFERENCES.
3. Press [Enter] or [Return] to view the individual menus.
4. Use the arrow keys to place the highlight bar over the required option, then
use the space bar to change the setting of the option as required.
5. Press [Esc] (the escape key) to quit the menu system and save your changes.
The following subsections describe each of the options in these menus.
4.7.1 S ECURITY
Accessed through: SETUP OPTIONS
Possible settings: DISABLED (factory default), ENABLED
With security disabled, users don’t have to log into the Duo/Quadro system. All
users have full access to all of the connected computers and full administration
rights. With security enabled, users have to log into the system. Each user is
allocated access rights to computers by the system administrator (see Section 4.5),
and the computers to which they have access are the only ones that appear in their
on-screen menus.
4.7.2 L ANGUAGE
Accessed through: SETUP OPTIONS
Possible setting: ENGLISH (factory default), FRENCH, GERMAN
This option specifies both (a) the language that is used for the on-screen menus
and (b) the keyboard layout assumed for the keyboard. If you select French, an
“AZERTY” keyboard layout is assumed; if you select English or German,
“QWERTY” is assumed. New settings of this option will take effect when you exit
the SETUP OPTIONS menu. This option affects only how the Duo/Quadro
interprets the keyboard keys; it has no effect on the way that any attached computers
interpret those keys. Please avoid setting this option to a language you don’t