Specifications

41
CHAPTER 4: Configuration
4.6.1 T HE B ASIC P ROCEDURES
To create computer names, take these steps:
1. Make sure that you are logged on as the ADMIN user.
2. At the main on-screen menu, press the [F1] key for MORE MENUS.
3. Select EDIT COMPUTER LIST from the menu.
4. Press [Insert] to add a new computer name.
5. Type in the name of the computer and press [Return] or [Enter].
6. Type in the port number for this computer and press [Return] or [Enter].
7. As directed in the menu, use the space bar and function keys to choose which
users you want to be able to access this computer. The starred users will have
access to the computer. Don’t worry if not all of the user profiles have been
defined yet; you can allocate computers to users when you add the users to
the system later.
8. Press [Return] or [Enter] to create the new computer name.
9. Press [Esc] (the escape key) repeatedly to exit the menu system.
NOTE
To avoid confusing users, we recommend that when you’re adding
computers, you assign one name only to any given port unless you’ll be
creating an autoscan list with customized scan order (see Section 4.8).
Also, if you’re using CPU ports to cascade to other ServSwitch
Duos/Quadros, avoid giving names to those ports. Assign names only
to ports with CPUs attached to them.
Follow a similar process to edit users:
1. In the EDIT COMPUTER LIST, move the highlight bar to the computer that
you want to edit.
2. Press [Return] or [Enter] to edit the user’s name or to change the list of users
that have access rights to it.
3. Make your changes and press [Return] or [Enter] to save them, or just press
[Return] or [Enter] without making changes if you want to keep the existing
settings.
4. Press [Esc] (the escape key) repeatedly to exit the menu system.