Specifications

37
CHAPTER 4: Configuration
4.3 Enabling Password Security
The ServSwitch Duo/Quadro can be operated with or without security enabled.
With no security, all users will have full administration rights and full access to all
the connected computers. This might not be desirable for systems with more than
two or three users.
System security is enabled using the Duo’s/Quadro’s on-screen menu system.
The on-screen menus are activated automatically when you first plug in the
ServSwitch Duo/Quadro, but can also be triggered using the keyboard hotkeys
(see Section 5.5) or the front-panel controls (see Section 5.2)
To switch on the password-based security system, take these steps:
1. At the main on-screen menu, press the [F1] key for MORE MENUS.
2. Select SETUP OPTIONS from that menu.
3. Move the highlight bar onto the SECURITY option.
4. Press the space bar to enable security.
5. Press [Esc] (the escape key) repeatedly to exit the menu system.