R2 Extender Quick Installation Guide

Chapter 3 System Installation
Assemble the Mounting Bracket
1. Place the main bracket into the seating and use a spanner to fasten the bracket to the R2
Extender with M5×16 screws ○
8
and M5 washers ○
9
provided in the hardware packets;
2. Assemble the main bracket by placing articulation pole ○
2
to the T-form bracket ○
1
via a
M8×90 ○
4
screw through the insertion axe and fix with the M8 washer ○
5
, spring washer
○
6
and M8 nut○
7
;
Pole Mounting
1. Install the main bracket and the pole mount bar ○
3
over the top of the pole by securing the
drill holes of the pole mount bar to the main bracket ones and insert two M8×80 ○
4
screws,
spring washers ○
6
and washers ○
5
through the drill holes and main bracket;
Chapter 3 Hardware Installation Page 7