User manual

Chapter 5 Management Page 59
Time Settings
Compliant with NTP, R1 Extender is capable of keeping its time in complete accord with the Internet
time. Make configuration in “Basic” from “System”:
Figure 43 Time Settings
Enter the time server IP address and port respectively in “Time Server” and “Time Server Port”
fields;
Select your desired time zone from the drop-down list, check “Adjust for Daylight Saving
Time” if necessary;
Hit “Apply” to save settings.
GPS Coordinate Settings
The GPS Coordinate Setting helps you mark the latitude and longitude of the R2E. From Basic in
System, enter the coordinates and click the Apply button.