User manual

Chapter 4 Advanced Settings Page 38
Peer-to-Peer Links
Open “Peer-to-Peer Setup” in “Wireless”. Peer-to-Peer Links allow establishing PTP or PTMP
connectivity with as most four remote wireless devices, this feature only available under Peer-to-Peer
(CSMA) modeˁ
Figure 25 Peer-to-Peer Linksʳfor CSMA
To setup Peer-to-Peer link, first login the Web-based interface of remote R1 Extender, open
“About” in “System” and record the wireless MAC address of it.
Then, login the Web-based interface of local R1 Extender and open “Peer-to-Peer Setup” in
“Wireless”, input the WLAN MAC address of the remote one to “Remote MAC Address 1” field
and click “Apply”;
To check whether the link has been successfully established, you may use ping to justify.