User manual

Chapter 3 Basic Settings Page 25
Figure 14 Connect Up – Step 2
3. Insert the RJ-45 connector and make sure that the locking tab snaps home.
Figure 15 Connect Up – Step 3
4. Screw the sealing on the gland and tighten.
Figure 16 Connect Up – Step 4
Grounding
The R1 Extender is shipped with a grounding wire. The unit must be properly grounded to protect
against power surges. The grounding point can be found on the bottom of the unit. It is supplied with
an appropriate grounding lug for attachment to the ODU.
Figure 17 Grounding
R1 Extender RJ-45 Port