User's Manual

- 28 -
Create Encryption Keys Manually (64bit)
Warning: The WEP key must be set up exactly the same on the Wireless LAN
stations as they are on the wireless Access Points. If you set “MyKey” for the Wireless LAN
PCI Card, the same WEP Key “MyKey” must be assigned to the Access Point or other
stations.
Note: Different factories would have some different WEP setting. Therefore, before
setting access point or PCC WEP, please refer to manual respectively.
Status:
The Status field on the Configuration menu provides the following information.
State: When operating in Infrastructure mode, this field shows the MAC address of the Access
Point with which the Wireless LAN PCI Card is communicating. When operating in Ad-Hoc
mode, it shows the virtual MAC address used by computers participating in the Ad-Hoc
network.
Current Channel: Shows the channel on which the connection is made.
Current Tx Rate: Shows the highest transmit rate of the current association.
Throughput: Shows the short term transmit and receive throughput in bytes/second, and is