User's Manual

28
Backup / Restore Settings
The current system settings can be backup as a file onto the local hard drive by clicking
“Backup”. The saved file can be loaded back on the Access Point by clicking “Browse”.
When you have selected the settings file, click “Retrieve” to begin the process.
Furthermore, you may click “Restore” to factory default settings.
Reboot AP
The Reboot AP screen enables you to reboot your 802.11g Wireless Access Point. If any
changes are made and you want them to take effect, you need to reboot the access point.
Select the “Yes” check box and click “Apply”. It will take you about 80 seconds to go
through reboot. The Web-browser will not be accessible until the access point has finished its
reboot process.