User's Manual

19
Access Control
The Access Control allows you to restrict wireless access by MAC Address. This provides an
additional layer of security. Follow these steps:
1. In 802.11g SMB Wireless Access Point’s left page, choose the Access Control option from
the Wireless Setup.
2. If you want to enable filtering of computer by their MAC Address, click the check box
next to “Turn Access Control on”.
3. Then, either select form the list of available wireless stations that your Access Point has
found or enter the MAC address for each client. After enter the MAC Address, click
“Add” button in the MAC Address field to be managed.
4. Click “Delete” button if you wish to remove the MAC address from the list.
5. If you complete the settings, please click on “Apply” and then “Reboot” for changes to
take effect.