User's Manual

12
3-2 IP Setup
WAN Setup
The Access Point Name is used to give a name to your Access Point. This will enable you to
manage your Access Point more easily if you have multiple Access Points on your network.
Please choose the WAN Port.
Ø None(Bridge-only): The Access Point is acting as a wireless bridge.
Ø Ethernet and Wireless: The Access Point is acting as a wireless router.
After selecting the correct WAN port, you need to give your access point WAN Port IP
Address / AP’s IP Address.
Ø Static IP Address: Allows you to assign the Access Point a static IP Address.
Static IP Address: The default setting
IP Address: 192.168.0.222
IP Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
To change the IP Address, specify the new IP address for the 802.11g SMB Wireless Access
Point.