User's Manual

10
Chapter 3 Configuring your Access Point
with the Web-Based User Interface
3-1 Start-up and Log in
In order to configure the Access Point, you must use your web browser and please do the
following:
1. Type this Access Point’s address http://192.168.0.222 in the Location (for IE) or Address
field and press Enter.
2. Enter the system name (the default setting is “admin”) and password (the default setting is
“password”).
3. Click on the “Login now” button.
4. The main page will appear.
After you have logged-in the main page, the About, IP Setup, Wireless Setup, Tools,
Management, AP Status buttons will be shown. The main menu provides links to the whole
sections of the web configuration interface.