User Manual

7. Firmware Upgrade
Follow the steps below to upgrade the firmware of the camera:
1) Download the latest version of firmware (update.zip) for Z CAM E2C from Z CAM’s
website: http://www.z-cam .com/firmware-update/.
2) Put the update.zip file to the root directory of the SD card (DO NOT unzip it!).
3) Insert the SD card to the camera and power it on.
If the firmware version of file in the card is higher than the camera’s one, there will be
a pop-up message for firmware upgrade. Select “OK” and press OK button, the
camera will upgrade the firmware* and restart the camera after it’s finished.
4) If the version of the update.zip file in SD card is the same as or lower than the
camera’s one (to refresh or downgrade the firmware), there will be no pop-up message
when the camera is powered on. Go to Version in System setting, press OK button
and you will see the pop-up message for firmware update. Select “OK” and press OK
button to update the firmware*.