Manual

2.3. Ethernet Connection (to Computer)
With Ethernet connection to a computer (PC/Mac), you can control the camera and download
files with Z CAM™ Controller (4. CAMERA CONTROL), and do live streaming with Z CAM™
WonderLive (5. LIVE STREAMING, PC only)
There are 2 ways of connection: Direct Mode & Router Mode.
Direct Mode (default)
Connect the camera to the computer directly with an Ethernet cable. It’s default setting of the
camera.
!
Router Mode
1) Change the “Network” setting to “Router” in Z CAM Controller (PC).
Connect the camera to a router with an Ethernet cable, and then connect the router to the
computer via Ethernet network or WiFi.

2.4. Camera Reset
If you want to reset the camera, long press the Record button for 5 seconds, then the camera
will restart with all the settings back to factory setting.