Manual

upgraded correctly.
l Please follow the instructions above and don’t stop Z CAM Controller before the upgrade is finished.
l If you are not familiar with computer operation, please DO NOT upgrade the firmware by yourself.
l It’s under your own risk to upgrade the camera and Z CAM will not be responsible for any damage to the
camera or the computer by incorrect operation.
!
8. CAMERA MAINTENANCE
• As the camera is a precise instrument, please do not flop it or let it suffer physical
strike.
• As the camera is a non-waterproof of camera, please do not use it in water or a
humid environment.
• As the camera’s heating range is 0-40°C, please do not place or use the camera in
an environment where the temperature is lower than 0°C or higher than 40°C.
• Please do not use any detergent containing organic solvent to clean the camera body
and the lens.
• Please use soft lens cloth to clean the camera body and the lens regularly.
• Please do not disassemble the camera by yourself.
• Please do not place the camera in a darkroom, a lab or other places where corrosive
chemicals are stored.
* Please note this document will be updated irregularly and make sure you have downloaded the latest version from
the website: http://www.z-cam.com/360-vr-camera-s1/
Disclaimer: All product features and technical specifications stated above are subjected to Z CAM™ ‘s sole
interpretation and explanation.