User guide

VIRTUAL H.264 8/16 CH DVR USER GUIDE
9
2-3. Rear Panel
Table 2.2.1. Rear Panel Connections
Label Operation
VIDEO IN
8 /16 connectors for video input.
Connect camera output to Video-in (NTSC/PAL)
VIDEO OUT
1 connector for video output.
VGA
Connector for VGA monitor
AUDIO
Audio 1~4:AUDIO IN/ADUIO OUT(16ch use DSUB-9 for audio input and output)
SENSOR IN
Connection for sensor device.
ALARM OUT
1 alarm device output.
Provides simple On/Off switching by using relay. 0.5A/125V, 1A/30V
RS-485
Connect to PTZ camera,+ÆPTZ D+ / - ÆPTZ D-
LAN
RJ45 connector for LAN connection.
DC 12V
Apply 12V DC using the DC adaptor supplied with the equipment.
SWITCH
Select either VGA monitor or CVBS (Composite Video Blanking Sync) monitor.
DO NOT CHANGE THIS SETTING WHEN DVR IS ON.
DVR MUST REBOOT IF SWICH IS FLIPPED.
2-4. Remote Controller
ID DVR ID setup
REC Record manually
NUMBER Press number button to select channel. For channel 11~16,
press +10 key and followed by 1~6
ee Fast Rewind
ff Fast Forward
f/∥ Play/Pause
f-- PTZ/ Jump/Step forward
--e Jump/Step backward
SEL Enter
DIRECTION Direction or number 1 to 4
SETUP Setup menu screen
SEARCH Search menu screen
ESC Esc
BACKUP Capture
SEQ Sequential channel conversion