User guide

VIRTUAL H.264 8/16 CH DVR USER GUIDE

6. Upgrading Firmware

In order to upgrade, the firmware upgrade file must first be downloaded and copied into the USB memory stick.

Create a new folder in the USB memory stick and name it “upgrade”. Copy the firmware upgrade file

“app16xxxxxx.bin” into the “upgrade” folder.

NOTICE

The folder on the USB memory stick must be named “upgrade”.

After the firmware upgrade is copied into the USB memory stick, connect the USB memory stick to the

USB port on the front panel

1. Press <SETUP> button and enter the admin password.

2. Go to PASSWORD and select the ADMIN PASSWORD.

3. Enter the password as 12341234, and press <ENTER> button.

4. The engineering mode screen “DVR DIAGNOSTICS” will appear.

5. Select USB upgrade to start the upgrade process automatically.

6. After the upgrade is completed, select Boot Application to reboot DVR.

Engineering Mode Screen