User guide

VIRTUAL H.264 8/16 CH DVR USER GUIDE
25
4. Once you have selected the time zone, press <ENTER> button to move to the 60 minutes time table.
5. Select All or a specific channel to search by using <UP> and <DOWN> arrow buttons.
6. Once you select the channel, use the <LEFT> / <F> / <ADV> or <RIGHT>/ <F> / <REW> arrow buttons to
move the time line select bar (blue) to the point you wish to start playing the video clip.
7. Press <ENTER> button to playback the recorded video.
Time Line Search Screen
4-2-2. EVENT Search
The Event Search window is used to find stored video. Three categories of search filters can be applied: DATE,
CHANNEL and TYPE. Press <ENTER> to select a value and move down to the next category and use <UP>
arrow button to move up to the categories you have previously entered. The <ESC> button will return the user
to the previous screen.
1. Select the date of the video to begin searching. Use the <LEFT>, <RIGHT>, <UP>, and <DOWN> buttons
to navigate through the days.
2. Once you have selected the date, press <ENTER> to move to the CHANNEL selector.
3. Use <LEFT> and <RIGHT> buttons to change the channel selection from ALL to any of the available
channels.
4. Once you have selected the channel, press <ENTER> to move to the TYPE selector.
5. Use <LEFT> and <RIGHT> buttons to change the type of recording to ALL, MOTION, SENSOR, MANUAL,
or CONTINUOUS.
6. Once you have selected the type of recording to search for, press <ENTER> to show a list that meet your
search criteria.
7. Use <UP> and <DOWN> buttons to scroll through the on-screen listings.
8. Use <LEFT> and <RIGHT> buttons to display a list of events that happened previous to or after the current
selection.
9. Once the desired event has been selected, press <ENTER> to start playing back the selected video.
V:(Blue) Indicate video data in time bar
H:(Light Gray) Indicate audio data in audio bar