User guide

VIRTUAL H.264 8/16 CH DVR USER GUIDE

ON /OFF Audio function

Indicates alarm output is activated.

Event indicator. When there is an alarm (sensor alarm or motion alarm) in the

video channel, this icon will be highlighted in bright red.

Indicates a network client is connecting to the DVR.

Indicates sequencing mode is enabled.

Indicates the percentage of recorded data into HDD

R:A

Remote controller’s ID. User can define ID number in SETUP Æ system Æ

remote controller ID. User can use remote controller’s ID button to switch ID

number.(Default ID is 00)

4-2. Search Window

Press <SEARCH> button in live mode to enter the Search screen, followed by a password. Use arrow buttons or

remote controller to enter the password.

Search Window

4-2-1.TIME LINE Search

The TIME-LINE search window is used to find the stored video by using the time line bar.

1. Select the date of the video to begin searching by using <LEFT>, <RIGHT>, <UP> and <DOWN> buttons

to navigate through the days.

2. Once you have selected the date, press <ENTER> button to move to the time line search window.

3. Use <LEFT> / <F> / <ADV> or <RIGHT>/ <F> / <REW> buttons to select a time zone in the 24 hours time

table.