User guide
VIRTUAL H.264 8/16 CH DVR USER GUIDE
14
POST EVENT RECORD
Set the post event recording time duration up to 30 seconds for the
specified channel.
SCHEDULE
Set the recording schedule.
3-3-1. Motion Zones
By selecting Partial Zone in the Motion Zone menu, user can setup the motion sensing zones in the screen. Move
around each rectangular zone using 4 direction key buttons and press <ENTER> button to include the rectangular
region as part of the motion sensing zone. The rectangular blocks included as part of the motion zone are indicated
by changing the color of the blocks.
Motion Zone Selection Screen
3-3-2. Recording Schedule
To set up a recording schedule, select SCHEDULE in the RECORD menu.
Use the arrow buttons to navigate through the items and set the recording.
[ALL]: Press <ENTER> button to apply to the entire time zone and all channels.
[SUN to SAT]: Press <ENTER> button to apply to the entire time zone for the specified channel.
[ENTER]: The recording mode such as C (continuous), M (motion), S (sensor) and disable mode can be selected
by using <ENTER> button.
[COPY FROM to COPY TO]: Copy the entire setup values of the selected channel to another channel
NOTE
1. In order to receive smooth video during playback, it is highly recommend to set the
frame rate of each channel for more than 3fps
2. Switch to full screen during playback while audio recoding is enabled.