User's Manual

79
3. Remove the DTA set plate.
• Hold the both ends of the DTA set plate.
• Lift it slightly and then remove
it from the deep end.
• Remove dirt from the surface by wiping
it with a soft water-moistened cloth.
• After removing dirt, remove moisture from
the surface by wiping it with a dry soft cloth.
• When you cannot remove dirt, wash it
with water using a soft sponge. After
washing it with water, let it dry naturally
to remove moisture completely.
4. Remove the DTA cells.
• Lift the DTA cells slightly and
remove it from the left side.
• Remove dirt from the surface by wiping
it with a soft water-moistened cloth.
• After removing dirt, remove
moisture from the surface by
wiping it with a dry soft cloth.