User's Manual

112
■ List of Warnings (continued)
Display
number
Description Cause Measure to be taken
C20
Dirty tablet route
warning
The machine detects the
tablet except when you
remove and insert the
cassette and the machine
dispenses the tablets.
Clean the tablet route of the
motor base.
C21
Cassette jam
warning
Tablets are jammed in the
cassette.
Remove jammed tablets in
the cassette and then touch
[RESUME].
C22
Lower door open
warning
The lower door is open.
Close the lower door and then
touch[RESUME].
C23
Conveyor jam
warning
There is a jam in the
conveyor.
Remove the jam and then touch
[RESUME].
C24 PC version warning
The communication version
of the packing machine
does not match that of the
personal computer.
Contact with your dealer.
C25
Internal version
warning
The communication version
of the packing machine is
not correct.
C26
Printer head low
temp warning
Printing is disabled
because the printer head
temperature is too low.
Wait unit the printer head reaches
the suitable temperature.
C28
Slide UT out of
position warning
The slide unit is not set at
the correct position.
Set the slide unit at the correct
positionandthentouch[RESUME].
C29
Outer carousel limit
warning
The outer cylinder is not
set at the correct position.
Turn the outer cylinder until the
error message is released.
C30
Inner carousel limit
warning
The inner cylinder is not
set at the correct position.
Turn the inner cylinder until the
error message is released.
C32
Large hopper out
of position warning
The large hopper is not
attached to the correct
position.
Reattach the large hopper to the
correct position and then touch
[RESUME].
C33
Slide hopper out of
position warning
The slide hopper is not set
at the correct position.
Set the slide hopper at the
correct position and then touch
[RESUME].
C34
Duplicate cassette
warning
The cassette number is not
set properly.
Set the cassette number correctly
andthentouch[RESUME].
C47
Removing powder
UT out of position
warning
The removing powder unit
is not set at the correct
position.
Set the removing powder unit
at the correct position and then
touch[RESUME].
(P64)
(P54)
(P54)
(P87)