User's Manual
88
3. Clean the large hopper.
• Remove dirt from the surface by wiping
it with a soft water-moistened cloth.
• After removing dirt, remove moisture from
the surface by wiping it with a dry soft cloth.
• When you cannot remove dirt, wash it
with water using a soft sponge. After
washing it with water, let it dry naturally
to remove moisture completely.
4. Attach the large hoper.
• Insert the large hopper all the way.
5. Close the lower door.
• Close the door on the conveyor side.
• Close the acrylic door.
• Afterclosingit,push[PUSH]
on the acrylic door.