Specifications

Manual for MantraJet 1100 rev 1.03

Printer Alignment Services:

MantraJet 1100 is a mechanical device, thus a minor misalignment may occur due

to the handling of the printer. MantraJet 1100 allows correcting the undesired offset of

the printable area. Use the “Test print” button in the “Utilities” tab to print a diagnostics

image. If the circle is offset you can simply enter the desired offset and click the “Offset”

button. Offset values are RELATIVE TO THE CURRENT ALIGNMENT.

To shift an image to the left side, use negative value for X axis offset, when offset

to the right side is needed use positive value.

To shift an image to the top, use negative offset for Y axis offset, when offset to

the bottom is needed use positive value.

Use the Reset Alignment button to return to factory default offset of the printer.

NOTE:One must clicking on the Offset button for the change to take effect. Both X

and Y values will reset to zero and the tool is ready to use for another offset.

Test print button

Prints an alignment and diagnostics pattern on a disc.