Specifications

Manual for MantraJet 1100 rev 1.03

Installing ink cartridges:

1. Turn the printer on.

The ink cartridge cradle will not move if the power is not on.

2. Open the large printer cover.

3. Wait until the ink cartridge cradle moves to the right side of the printer and is idle

and quiet.

4. Remove the new ink cartridge from its packaging and carefully remove the

protective plastic tape. Hold the print cartridge so that the copper strips are on the

bottom and are closest to the printer.

CAUTION: Do not touch the print cartridge ink nozzles or copper contacts.

Touching these parts will result in clogs, ink failure, and bad

electrical connections. Do not remove the copper strips. They are

required electrical contacts.

5. Snap open the blue (color ink) and gray (black ink) cartridge covers.

6. Slide each print cartridge into its designated cradle at a slight upward angle until

the cartridge snaps into place. Please do not force the ink cartridge. Snap the

cartridge covers closed.

7. Close the printer cover and wait. The printer will take about a minute to initialize

the cartridges. If you are replacing a print cartridge, press down on the print

cartridge to be replaced, and then slide it out of the print cartridge cradle.