E10T QUICK START GUIDE V1.
Model Name: E10T Dimensions:123*81*140mm Weight: 370g Environmental Operating Temperature Range: -10℃ to 40℃ Camera Infrared Lens： Thermal Imaging System: Uncooled Vanadium (VOx) Microbolometer Sensitivity (NEdT) : <50 mK FPA/Digital Video Display Formats: 320 × 256 Pixel Size: 12 μm Spectral Band: 8 - 14 μm Exportable Frame Rates: <9Hz(U.S.
FOV: 90° Video Resolutions: FHD: 1920x1080 30FPS Photo Formats: JPEG Video Formats: MP4 Operation Mode: Capture, Record Exposure Mode: Program AE Mode, Manual Exposure Mode Exposure Compensation: ±2 Metering Mode: Spot Metering, Center-weighted Metering, Average Metering Shutter Speed: 1/30 – 1/8000 s White Balance: Daylight, Cloudy, Auto, Fluorescent, Incandescent, Sunrise/Sunset ISO Range: 100-3200 Digital Downlink Distance: 2km Gimbal Installing Assembling Step 1.
Find the locking clip which is located in front of the mounting slot. Step 2. Press and hold the locking clip and push the E10T forward (the direction shown by the arrow). Binding the E10T Step 1. Switch on the ST16S and the H520 aircraft. Step 2. Tap the [ ] on the top right corner on the main interface of ST16S. Step 3. Tap the serial number of the E10T when the following window pops up.
Step 4. Using the password “1234567890”, authorize the camera and tap “OK” to confirm. NOTICE If the connection process is delayed, close the pop up window and then repeat the above steps. NOTICE 1 Ensure that the firmware of the gimbal has been updated to the latest version. 2 For the latest product information, please check our official website：www.yuneec.com WARNING Do not try to repair the E10T gimbal camera. Do not expose the lens of E10T gimbal camera to extreme light sources.
NOTICE Procedures, which if not properly followed, create a possibility of property damage and/or little to no possibility of injury. CAUTION Procedures, which if not properly followed, create the probability of property damage and/or a possibility of serious injury. WARNING Procedures, which if not properly followed, create the probability of property damage, collateral damage and/or serious injury or create a high probability of superficial injury.
medication or other narcotics which may impact on the concentration of the user. The same applies to illnesses effecting the concentration of the user(dizziness, tiredness, nausea etc.) or other factors compromising mental and physical capabilities. Intentionally caused damage, injury or violation of legal regulations. Any request for compensation caused by an accident resulting from use of the product.
5G Wifi: 5560-5580MHz (27dBm), 5680-5700MHz (27dBm) EU Compliance Statement Hereby, Yuneec International (China) Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of the RED Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: http://yune.ec/de-downloads. Please visit the address above and enter into corresponding product page.
