Breeze FPV Controller EN USER MANUAL IT DE BEDIENUNGSANLEITUNG CN 使用说明 MANUALE D'USO FR MANUEL D'UTLISATION ES MANUAL DEL USUARIO
EN INTRODUCTION Breeze FPV Controller allows users to pilot their Breeze in a new way. The portable Game Controller is connected to the smart device via Bluetooth, and enables users to control the Breeze accurately with physical joysticks and buttons. It is compatible with the Breeze Cam application (Breeze Cam is a remote control application for Breeze) on iOS devices (above iOS 8.0 version) and Android devices (above 4.
EN 15 14 13 06 07 12 11 08 09 10 06 07 08 09 10 11 12 13 14 15 Gimbal Tilt Trim Drone Yaw Trim Altitude/Throttle Control Yaw/Rudder Control Power Button Roll/Aileron Control Pitch/Elevator Control B: Parameters Hidden Y: GO HOME Start Button: Press the Start Button for 3 seconds to take off Press the Start Button to land/cancel landing during flight 16 Android Mode indicator light 17 Apple Mode indicator light 16 17
EN SPECIFICATIONS Working Platforms: iOS/Android Working Temperatures: -20~65 Working Humidity: 20~80% Connection Types: Bluetooth Charging Voltage: 3.7~5.2V Charging Time: 2-3H Charging Current: 1A-2A Working Distance: Approx.7M Battery Capacity: 600mA Product Size: 160 x 104 x59mm Net Weight: 189g PREPARATIONS 1. CHARGING THE BATTERY 1. Charge under connection state After connecting the charging cable, Power button and ABXY lights flash once/2 seconds, and the lights keep on when fully charged. 2.
EN Battery Warnings: To charge the LiPo battery, you must only use the included charger. Do not over-discharge the LiPo battery. If at any time the LiPo battery begins to balloon or swell, discontinue charging or discharging immediately. Always terminate all processes if the battery/charger malfunctions. Store the LiPo battery at room temperature and in a dry area for best results. Allow the LiPo battery to cool to ambient/room temperature before recharging.
EN 3. DOWNLOADING THE BREEZE CAM APPLICATION Download the Breeze Cam application on your smart device, available for free on the App Store and Google Play Store.
EN 4. BREEZE CONNECTION Power on your Breeze on a flat and stable surface and wait for it to complete initialization. When the LED indicator blinks blue rapidly, Breeze has entered the “Wi-Fi” bind mode. METHOD 1: If you are using an iPhone, select Settings > Wi-Fi ;If you are using an Android smart phone, select Settings > Wireless and networks > Wi-Fi. Select the network: BreezeXXXXXX and enter the Password: 1234567890.
EN 60 % Step 2) There are 6 Flight Modes for you to select in the Task page. To enter the FPV Mode, you can select the [ ] icon. PILOT 8 SELFIE ORBIT JOURNEY FPV MODE FOLLOW ME FPV MODE Before GPS is ready, only Pilot mode can be used. 8 60 % Step 3) Slide the “SLIDE TO PROCEED” bar to confirm that you have entered the FPV Mode. You are about to activate FPV Mode. Place Breeze on the ground with the tail facing you. Ensure that Breeze is in a safe place and free of obstructions.
EN Step 4) Tap the [ ] icon in the lower right corner of the screen and a window will pop up. In the pop-up window, select “Allow” to turn on Bluetooth on your smart device. When the [ ] icon disappears from the screen, that means the Game Controller is connected to your smart device via Bluetooth successfully. 60 % FPV MODE 8 Tap "Experience Now" icon, and place your Mobile Phone into the FPV Step 5) Tap the “Experience Now” icon on the screen, and Goggles. Press R2 to view all button descriptions.
EN Recommendations If you wear glasses normally, please keep wearing glasses while using this device. Charging the smart device while using FPV Goggles is strictly forbidden. We suggest users take a break every 30 minutes in order to prevent visual fatigue. If you find that the 3D image doesn’ t match together, you can open the buckle and adjust the smart device’ s position slightly in order to get a clear image.
EN Installation Method for the Game Controller Holder: Step 1) Press the buckle of the holder downward to unlock. Step 2) Pull up the Clamp Retainer. Step 3) Attach Game Controller to the clip then pull back the clamp retainer. Step 4) Button up the buckle. Step 5) Open the seat of the holder and mount your smart device. Step 6) Loosen the smart device holder’ s screws. Step 7) Adjust the angle to fit your phone. Step 8) Tighten the screws.
DISCLAIMER Yuneec Electric Aviation cannot be held liable for any damage, injury or for use of the product in violation with legal regulations, especially in the following circumstances: Damage and/or injury as well violation of legal regulations resulting from a failure to comply with the operating instructions or the instructions at www.yuneec.com, product information, user manual and other legally binding information.
EN Damage and/or injury brought about through a violation of the legal regulations for operating the model, in unsuitable weather conditions, e.g. rain,wind, snow, hail, storms, hurricanes etc. Damage and/or injury as well as violation of legal regulations caused by force majeure, e.g.collision, fire, explosion, flooding, tsunami, landslide, avalanche, earthquake or other forces of nature. Damage and/or injury as well as violation of legal regulations caused by the illegal or immoral use of the model, e.g.
FCC STATEMENT This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EN —Consult the dealer or an experienced radio/TV technician for help. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
COLLECTION AND PROCESSING OF DATA Yuneec may collect navigation information such as GPS data to help improve our products. We may also collect Depth Map information and Infrared Image information from your drone delivered to our service center for repair and maintenance service or any other service. We may also collect other information such as device information, server log information, etc.
EN CUSTOMER SERVICE Manufacturer: Yuneec International (China) Co., Ltd. Production Address: East Zhengwei Road No.388, Jinxi Town, Kunshan City, Jiangsu Province Distributor: CN: Youyu (Shanghai) Digital Technology Co.,Ltd. Address: B 15F, 461 HongCao Road, CaoHeJing Software Building XuHui District, Shanghai, China Tel: +86 400 8207 506 US: Yuneec USA Inc.
Any information below might be changed due to the software update. For the latest documents, please check the official website.