Download

The LED indicator blinks white or yellow during the whole compass calibration process, when
you complete the process, the LED will blink green and Breeze will emit an audible sound.
Recalibrate the compass if the LED blinks red as this means calibration has failed.
Succeeded
Failed
9. COMPASS CALIBRATION
NOTICE: Only calibrate the compass in open areas/fields far away from cars, power lines and other metallic surfaces/structures. Make sure that your Breeze
is placed level and about 1.5m (5ft) above the ground.
North
1.5m ( 5ft )
Tap [ ] and select Drone Settings, and then swipe the screen to “Compass Calibration”.
Follow the on-screen animations to complete the calibration.
During the Whole Calibration Process
Entered into Compass Calibration
Step1 Step2 Step3
10. PROGRAMMING YOUR DRONE SETTINGS
Tap[ ] on the main interface and select [ ], you can set the default height after take off, name the drone, set flight boundaries, complete
compass calibration and enable/disable liability disclaimer.
Drone Settings