Download

6. POWERING ON/OFF BREEZE
POWER ON: To start your Breeze, press and
hold the power button at the rear of Breeze.
When Breeze is on, the LED indicator will blink
blue-red-green four times and emit a sound.
When the LED indicator blinks blue rapidly,
Breeze will enter “bind” mode.
POWER OFF:
Press and hold the power button
until the LED glows solid red. After successfully
switching off, it will emit a “power off” sound
after letting go of the power button.
Breeze is on (emits a sound)
Bind mode
METHOD 1: If you are using an iPhone or an iPad,
select Settings > Wi-Fi ;
If you are using an Android smart phone, select
Settings > Wireless and networks > Wi-Fi. Select
the network: BreezeXXXXXX and enter the
Password: 1234567890.
Power on your Breeze on a flat and stable surface
and wait for it to complete initialization. When
the LED indicator blinks blue rapidly, Breeze has
entered the “Wi-Fi” bind mode.
7. BINDING BREEZE WITH YOUR SMART DEVICE
METHOD 2: Tap [ ] and you can connect the
Wi-Fi network directly. Select the network: Breeze
XXXXXX and enter the Password: 1234567890.
NOTICE: To download the latest firmware,
make sure that your smart phone/tablet
computer is connected to the Internet.
1.Tap [ ] and select [ ]. Tap [ ] to enter
the firmware upgrade interface.
2.Tap [ ] to search for the latest
firmware.
3.Tap [ ] to download the firmware.
NOTICE: If you have installed the latest
firmware, a notice will pop up on screen
that says: "You currently have the latest
firmware installed on your system”.
4.Tap [ ] to proceed.
5.Bind your device to Breeze.
6.Tap [ ].
7. Wait until upgrade is completed and
restart Breeze.
LOOK FOR AVAILABLE
UPGRADES
DOWNLOAD BREEZE
CAM FIRMWARE X.X.XX
NEXT
UPGRADE
8. FIRMWARE UPGRADE
i