User Manual
23
LED STATUS INDICATIONS
LED STATUS INDICATIONS DURING STARTUP
Main LED Status Indicator
- Inializaon failed
- The Aircra is in "Bind" Mode
- The Aircra is in a No-Fly Zone *
* Please see the instrucon manual for more
informaon regarding no-fly zones
LED STATUS INDICATIONS BEFORE/DURING FLIGHT
Main LED Status Indicator
- The Aircra is in Smart Mode with GPS lock
- The Aircra is in Smart Mode without GPS lock
- The Aircra is in Angle Mode with GPS lock or IPS
- The Aircra is in Angle Mode without GPS lock or IPS
- The Aircra is in Home Mode
- Enter Task funcon
- First Level low Voltage Baery Warning
- Second Level low Voltage Baery Warning
- GPS Disabled
NOTICE:
White blink between solid flight mode indicates enough
satellites for Watch Me/Follow Me.
Below Motor Led Status Indicators
- Low voltage baery warning
LED STATUS INDICATIONS FOR CALIBRATION MODES
Main LED Status Indicator
- Compass Calibraon Mode Entered
- Compass Calibraon Started
- Accelerometer Calibraon Mode Entered
- Accelerometer Calibraon started
- Calibraon failed
CGO3+ CAMERA LED STATUS INDICATIONS
- Without T-card or T-card Memory Full
- WiFi Error
- WiFi Inialized
- WiFi Connected
- Recording Video or Taking Sll Photos
Pulses red (3 mes per second)
Blinks orange very rapidly (10 mes per second)
Blinks red and white rapidly(5 mes per second)
Glows solid green
Blinks green (3 mes per second) then off (for 1 second)
Glows solid purple
Blinks purple (3 mes per second) then off (for 1 second)
Blinks red rapidly (5 mes per second)
Blink green and purple slowly (1 me per second)
Blinks red, green and blue every 3 seconds
Blinks red, green and blue connuously
Blinks purple (1 flash per second)
Blinks
rapidly (5 mes per second)
Blinks red and green slowly (2 mes per second)
Blinks red and green rapidly (5 mes per second)
Blinks red, green and blue slowly (1 me per second)
Blinks red, green and blue rapidly (3 mes per second)
Glows solid white
Blinks yellow
Blinks red
Blinks green
Glows solid green
Blinks green, blue slowly