User's Manual

To remove the propeller protectors, unlock them from
the engine arm from one side to another.
5. REMOVING THE LENS COVER
6. INSTALLING THE FLIGHT BATTERY
Slide in the fully charged battery until it locks.
Remove the battery by pressing the locking tab
and sliding the battery to the rear of Breeze .
7. POWERING ON/OFF BREEZE
POWER ON: To start your Breeze , press and hold
the power button at the rear of Breeze.
When Breeze is on, the LED indicator will blink
blue-red-green four times and emit a sound. When
the LED indicator blinks blue rapidly, Breeze will
enter “bind” mode.
Breeze is on (emits a sound)
Bind mode
NOTICE: FAMILIARIZE YOURSELF WITH EACH TASK
MODE BY READING THE TUTORIALS ON THE BREEZE
CAM APP BEFORE OPERATING BREEZE.
Install the four propeller protectors to the correspond-
ing positions as shown in the illustration below.