User's Manual

PRO MODE BUTTON
LED KEY
OPERATING
1. Hold the eVo by the gimbal handle to operate.
2. Power on the eVo with the power button on the side of the eVo stage.
Please note: the LED lights on the rear of the eVo stage will flash for 3-4
seconds on power up before the eVo is ready for use.
3. Using one hand or both, use the gimbal guide to control the pan and tilt
of the eVo while shooting.
ONE-HANDED OPERATION
TWO-HANDED OPERATION
OPERATING: PRO MODE –
Once you feel comfortable operating the eVo in it’s out of the box
Basic Mode, you can try operating in Pro Mode, which increases
the eVo’s sensitivity to the operator’s controlled movements.
1. Press the button on the rear of the stage twice to enter into
Pro Mode. You’ll know the eVo is in Pro Mode when the
middle LED is lit up green. To exit Pro Mode and go back into
Basic Mode, press the button once.
RED = ERROR
GREEN = PRO MODE ON
BLUE = BATTERY LIFE;
BLUE LED WILL BLINK
WHEN BATTERY IS
GETTING LOW
Quick Start Guide
Steadicam Evo is a registered trademark of The Tiffen Company. All other
trademarks are the property of their respective owners.
90 Oser Avenue, Hauppauge, NY 11788
1 800 645 2522
www.tiffen.com
Please see www.tiffen.com//warranty.html for details on Steadicam 1 year
limited warranty.
The eVo package contains: (1x) eVo stabilizer; (2x) 3.7V 900mAH li-ion
batteries; (1x) Dual USB Charger; (1x) Micro USB Cable; (2x) Balance Weights.
Please see next page for certified terms of use.