Quick Start Guide

Assembling
Step 1.
Find the arrow printed on the top of the damping
plate, which indicates the correct direction for instal-
lation.
Step 2.
Slide the E30Z in the indicated direction all the way
into the mounting slot, until the E30Z is secured by
the locking clip.
Step 3.
Remove the lens protector.
Step 4.
Insert the Micro SD card.
Gimbal Installation
Disassembling
Step 1.
Find the locking clip which is located in front of the
mounting slot.
Step 2.
Press and hold the locking clip and push the E30Z
forward ( the direction shown by the arrow ).