User's Manual

9
PHOTO TAKING AND VIDEO RECORDING
ST24 seamlessly integrates control of CGO4 gimbal camera so that you can easily take still
photos and start/stop video recording through corresponding buttons.
CAUTION: If CGO4 is carried on H920, it can only be controlled through ST24.
TO TAKE PHOTOS
Press the button located on the left side of ST24. You’ll hear an audible ‘shutter’ sound from
ST24 and it will take approximately 5 seconds to capture the photo before you can take
another photo.
NOTE: You cannot take still photos during video recording.
NOTE: You must stop video-recording in order to take photos.
TO START/STOP VIDEO-RECORDING
Press the button located on the right side of ST24. You’ll hear
an audible indication from ST24 each time the recording
starts/stops. And while video is recording, there will be a red
dot next to the video-recording timer near the upper
right-hand corner of ST24.
CAUTION: If the video is being recorded on ProAction, repress
the video recording button to end the process; otherwise, the
video is unable to be saved.
(A) = To take photos
(B) = To record videos
CGO4 INTERFACE (ST24)
Welcome, Pilot
GPS
N/A
SAT
N/A
POS
N/A E
N/A N
MODE
N/A
VOLTS
ALT
G-SPD
DIS
System Sengs
00:00:00
Model Select
N/AV
N/Am
N/A KPH
N/A m
STD
4K
30
p
4:3
On
MODE
P
WB
ISO
200
-2/3
F3.5
1/60s
9:43:31 pm
Channel Settings
AFS
H
Model: H920 CGO4
01 02 03 04 05 06 07
01. CAMERA SWITCH 02. CAMERA MODE 03. WHITE BALANCE 04. ISO SENSITIVITY
05. EXPOSURE VALUE 06. APERTURE/SHUTTER SPEED 07. MENU SETTING